IBC water tank connection 1000 litres

    100245

    S60x6 - Right-hander '25mm' faucet connecting to the valve of your 1000-litre IBC tank. It is possible to connect a garden hose to the tank and water directly from the tank.

    1583 Items
    €9.90
    Tax included
    In Stock

    (4,6/5) out of 20 total ratings
    Read the reviews



    Today, the recovery of rainwater has become a citizen's gesture and above all an ecological gesture. To do this, more and more people are using 1000-litre pallet tanks,also known as IBC or GRV, the most cost-effective solution. However, these tanks were not originally designed for this and were therefore not studied for watering.

    multitanks therefore proposes to remedy this a whole range of fittings coming screwed on the valve of the IBC tank, thus allowing a reduction and offering the possibility of attaching a garden hose to the tank.
    The fitting presented here will screw S60x6 valves only, so on valves with an output diameter of 60mm off all, with 3-4 nets spaced 6mm apart.
    filetage s60x6
    D1: 60mm - P1 - 6mm
    Composition of this faucet:
    - S60x6, tapped 3/4' not gas
    - 1/4 turn faucet with fluted straight output, not gas
    - Joint 3/4''
    - Material: PEHD
    This faucet comes without the demonstration valve

    Multitanks
    100245
    1583 Items

    Technical data sheet

    Type of connection input
    S60x6 plug in PEHD
    Exit type
    with plastic faucet, with fluted output
    Diameter
    25mm
    Type of accessory for 1000-litre tank
    1000L tank connection
    Type of thread
    S60X6
    Material
    HDPE
    Faucet
    With
    Summary#1
    This accessory is specially designed for 1000 liter plastic tanks (also called IBC or IBC)
    Summary#2
    Faucet with 25mm output mounted on a female S60x6 nut screwing onto the valve of your 1000L tank
    Summary#3
    Possibility to connect a garden hose to the tank and water directly from the tank.
    Summary#4
    S60x6 thread: the output diameter of your valve must be 59 to 60 mm overall
    Summary#5
    S60x6 thread: The output of your valve must have 3 to 4 threads spaced 6mm apart

    10 other products in the same category: