Water, a fully automated device management

A complete system that collects, stores, distributes

(no noise, no problem with aspiration)

Collect and filter

1 - Recovery of roof water and power of the storage tank

2 - Filtration and by-pass, the water arrives on a self-cleaning filter in inclined plane. The leaves and other materials are evacuated by the too full and do not penetrate into the tank.

Store

3 - Filling of thetank by a tube diving to avoid eddies

4. Too full evacuation of water when the tank is completely full. The water is retrieved on the surface, allowing to evacuate the floating

Use

5 - Hose suction with float, which allows to monitor the level of the water and pump in the clear water. The pipe is fitted with a strainer and an anti return valve

6 - Pump immersed fully automatic and sensor level

7 - Centering DMG +, for lack of water in the tank (the information is given by the probe) the solenoid valve is opened and the tank is fed water of city during a period fixed (minutes)

Operation

The pump is immersed in the tub, the discharge pipe is connected to the equipment receiving of rain water. The suction hosefollowing the water level, which allows to aspire perfectly clear water. The opening of a valve pump starts automatically and it automatically stops at the closing (the pump in water, it emits no noise). In times of drought the tank is powered by the city water system. A minimum level is maintained until the next fill in rainwater (this device ensures a total disconnection between the network of city water and rain water)