Half symmetrical fitting Guillemin, firefighter, ringed socket reduced to stainless steel collar

The symmetrical, ringed socket fitting reduced to collar is intended to be crimped on pipes. It can be assembled by different crimping systems: stamped skirts, turret necklaces, leaf and notched skirts. The symmetrical fitting can be used for suction and refoulement, its areas of use: firefighting, oil, chemical, petrochemical, pharmaceutical, construction, maintenance, agriculture, irrigation, steel mills, bulk transport and sprays.

Our assembly tips:

• Present the half-connections face to face
• Assemble the semi-fittings, the joints must be glued against each other
• Turn the lock rings (locks) by hand so that the guides (jaws) come together (the Guillemin lock rings or lock rotate 360 degrees)
• Finalize the tightening operation with a key (also sold on our site)
• Our first-mount fittings have NBR seals mounted on Guillemin's lock fittings.

Service Pressures:
Service pressure: 16 bars
Test pressure: 32 bars
Break-up pressure: 50 bars

Matter:Stainless CF8M AISI316 / 1.4401
Matching compliant with standards:
NF E 29.572 / NF EN 14420-8 Half symmetrical connections GUILLEMIN service pressure 16 bars