Name: Female cap S60x6 - female 3/4 inch brass
Brand: Multitanks
SKU: 101043
Price: 11.7 EUR
Availability: InStock

This accessory is specially designed for 1000-litre plastic tanks (also called IBC or GRV) used for rainwater recovery, storage and consumption. It attaches directly to the valve of your 1000 L tank.

This special S60x6 garden brass fitting allows you to screw a garden faucet onto it and allow you a simplified watering from your 1000-litre tank. It makes it easy to maintain your garden.

Features:

Material: brass
Entry: female S60X6
Exit: female 3/4 ''
Weight: 120g
Article nine

your valve must be at the S60x6 standard, see the sketch attached

filetage s60x6

D1: 60mm
P1: 6mm

BrandMultitanks

Reference 101043

In stock707 Items

Technical sheet

Summary #1: This high-quality brass adapter cap is the essential accessory to transform your 1000 liter rainwater collection tank (IBC / IBC) into a real watering station. Designed for direct installation on your tank valve, it provides a robust and watertight transition between the tank's specific thread and standard gardening accessories.
Summary#2: This fitting has an S60x6 female inlet, the most common standard on 1000 liter plastic tanks. It screws directly onto the outlet thread of your valve (60 mm outer diameter, wide threads). Its 3/4" (20x27 mm) female outlet is ideally sized to accommodate a garden faucet, faucet connector or any other quick connect connection, allowing you to draw stored water with ease.
Summary#3: Unlike plastic adapters that can become brittle under the effect of UV rays or temperature variations, this solid brass model offers exceptional mechanical resistance. With a weight of 120 g, it guarantees precise screwdriving and increased durability, even during intensive use during the summer season. It is the ideal investment to ensure the sustainability of your water recovery system and facilitate the maintenance of your vegetable garden or flower beds.
Summary#4: Assembly is done in seconds without any special tools. For optimal sealing, we recommend checking for the gasket at the bottom of the S60x6 fitting and, if necessary, adding a few turns of PTFE tape to the thread of your faucet when mounting it to the 3/4-inch outlet. This connection simplifies gravity watering or can be used as a base for connecting a surface pump to your water supply.
Summary#5: Before ordering, make sure that the valve in your tank is S60x6 standard. This standard corresponds to a valve outlet with an outer diameter of threads of approximately 60 mm and a thread pitch (distance between threads) of 6 mm. If your valve has very fine threads (gas type), this adapter will not be compatible without an intermediate fitting.
Fitting Input: Female 2'' S60x6
Female 3/4'' no BSP gas
Fitting Type: Female / Female
Stopper
Material: Brass
Fitting Outlet: Female 2'' S60x6
Female 3/4'' no BSP gas