DC402 Air Conditioning Refill Kit for Duracool Can / Multicool / Climapure

The DC402 professional mobile air conditioning refill kit will allow you to recharge the vast majority of vehicles on the market  with our Duracoolrefrigerant  gas.  It is equipped with a tap with 1/2 ACME thread and two R134a and R12 low-pressure fittings

Attention: Some manufacturers such as Renault for example only install a single high-pressure fitting on their vehicle models instead of putting a low-pressure fitting and a high-pressure fitting. If, after checking on your part, it turns out that this is your case, you will then need to acquire the following fitting in addition: QC HA R134a fitting to be able to connect to the air conditioning circuit.

Composition of this refill kit:

- Self-piercing tap that attaches to the bobbin

- two sets of fittings provided:  R12 (to screw on) and R134a (to clip), allowing you to connect to all vehicles on the market. namely, the R134a fitting is screwed into the R12 fitting, so you will need to unscrew the R134a fitting to have access to the R12 fitting. This last "Schrader" type fitting is also present on other air conditioning systems and refrigeration units (boat fridge equipped with R134 for example). 

- An integrated PSI pressure gauge for a view of the vehicle's current load and optimal charging

The brass tips of this kit, and a high quality of the hose, will allow you to make a large number of refills without the risk of leaks in the long run.