To water the garden and supply domestic water to the house

The 5900/4 stainless steel automatic submersible pump GARDENA is an efficient solution for all your watering needs. Ideal for drawing water in depth, practically without noise and thus watering your garden. It guarantees good performance thanks to a high flow.
With a maximum flow rate of up to 5900 L / h and 3.5 bar maximum pressure, the 5900/4 stainless steel GARDENA submersible pump allows you to use up to three large sprinklers simultaneously. This submersible pump has a diameter of 149 mm and can therefore be used for wells of 150 mm in diameter. Equipped with a body and a stainless steel thread, it is particularly robust. If sediment forms at the bottom of your well, your GARDENA submersible pump has a built-in filter to prevent sucking up dirt. You can also use the floating suction filter GARDENA (Ref. 1417-20) available as an accessory. It is designed to float on the surface of the water. The water is therefore not drawn off from the bottom of the well, but directly from the surface to avoid sucking up impurities.
In the event of a water shortage in your well, your submersible pump has a low-water safety device which is automatically activated to prevent damage to your water pump by preventing it from running dry. The automatic submersible pump 5900/4 stainless steel GARDENA has an integrated non-return valve which guarantees water very quickly available. Your submersible pump comes with the following accessories: The 20 m long fixing rope and 15 m connection cable give you enough free space during installation.

Characteristics
Nominal power	900 W
Max flow	5900 l / h
Max pressure	3.5 bar
Maximum immersion depth	12 m
Manometric height	35 m
Max temperature some cash	35 ° C
Cable length	15 m
Electrical protection index	IPX8

Assured power

Thanks to its 3-stage turbine, the submersible pump is very powerful to allow you to easily suck water from your well or your cistern. So you can easily use it with a sprinkler gun or up to 3 oscillating sprinklers.

Automatic start / stop

Thanks to the "automatic start / stop" function, the submersible pump GARDENA starts and stops automatically according to the water demand. The “leak detection” function prevents damage to the pump and prevents possible water damage. The "small quantity" program guarantees correct operation of the submersible pump even in the event of very low water requirements (eg with a drip irrigation system or washing machines.

Stainless steel pump

The coolant pump body and thread are made of stainless steel for strength and long tool life.

A removable integrated filter

The garden pump is equipped with a built-in filter which protects it from damage. The filter is accessible so you can easily remove and clean it.

Floating suction filter

The floating suction filter is available as an accessory and can be used on this garden pump. All you need to do is remove the base of the built-in pre-filter of the submersible pump and then plug in the floating suction filter. Thus, your pump can be used to suck water from cisterns / wells containing sediment.

For great depths

This submersible pump GARDENA is delivered with a 15 m power cable and a 20 m suspension cable. It is therefore ideal for drawing water from deep wells, up to 12 m of maximum immersion.