Traitement Antimousses pour toitures et murs

    Antifoam treatment for roofs and walls

    AMTPB5

    TREATMENT ROOFS & WALLS is an anti-mold, lichens and algae, intended for the treatment of all hard surfaces. Both preventive and curative, it quickly and durably destroys these plant pollutants, without staining or degrading

    6 Items
    €24.50
    Tax included

    Il n'y a pas encore d'avis.
    TREATMENT ROOFS & WALLS is an anti-mould, lichen and algae, intended for the treatment of all hard surfaces. Both preventive and curative, it quickly and durably destroys these plant pollutants, without staining or degrading.


    TREATMENT ROOFS & WALLS also has a disinfectant action and removes all traces of mould. To facilitate its use, TREATMENT ROOFS & WALLS is a ready-to-use product that can be used without dosage or prior preparation.

    DIRECTIONS FOR USE:ROOFING & WALLS TREATMENT is a ready-to-use product that does not require any dilution in water, nor any prior preparation. Apply ROOFS & WALLS TREATMENT directly to the surfaces to be treated. Spray thoroughly on algae, lichens and mould. In the case of abundant mould, remove it within 15 days after treatment with a pressurized spray or brushing.

    Highly concentrated ready-to-use FORMULATION: 4.5% Benzalkonium Chloride

    EASY: no rinsing and no staining

    5L: up to 100m² of treatment

    Advice:
    • Scrape and brush areas where streaks are significant
    • Check for rain, wind and frost 48 hours before and after application
    • Do not apply in case of too much heat to limit evaporation
    • Apply the product with a sprayer
    • Do not rinse and leave on

     

    Protect Expert
    AMTPB5
    6 Items

    Technical data sheet

    Summary#1
    TREATMENT ROOFS & WALLS is an anti-mould, lichen and algae, intended for the treatment of all hard surfaces. Both preventive and curative, it quickly and durably destroys these plant pollutants, without staining or degrading.
    Summary#2
    TREATMENT ROOFS & WALLS also has a disinfectant action and removes all traces of mould.
    Summary#3
    To facilitate its use, TREATMENT ROOFS & WALLS is a ready-to-use product that can be used without dosage or prior preparation.
    Summary#4
    Apply ROOFS & WALLS TREATMENT directly to the surfaces to be treated. Spray thoroughly on algae
    Summary#5
    Highly concentrated ready-to-use FORMULATION: 4.5% Benzalkonium Chloride

    8 other products in the same category: