Home

The Kuhlmann Heating Tape Kit in its 100 W/m version is a high-power electrical heat tracing solution for demanding thermal needs. Capable of holding pipes, valves and tanks at temperatures of up to 200°C, it is ideal for heating complex processes or frost protection in very cold environments. Its power of 100 Watts per meter on a 230V...

The Kuhlmann Heat Scribing Kit is an extremely powerful electrical heat scribing solution, designed to reach temperatures up to 400°C. With a power of 250 W/m at 230V 50Hz, it is ideal for maintaining and heating heavy processes in the industrial and laboratory sectors, especially for the management of chemicals and highly viscous fluids. Its robust...

The self-piercing valve M12 x 1/4'' male MC0006 is specially designed for use with Multicool canisters equipped with M12 thread. This practical solution enables quick and leak-proof connection for your air conditioning and refrigeration systems. Thanks to its self-piercing system, installation is done without specialized tools,...

The Pack of 20 White S60x6 PE Flat Gaskets is the workshop reserve: a gasket is replaced at every emptying and at every change of product, and it is better to have twenty in hand than one to order in a hurry. White high-density polyethylene, S60x6 format, the standard for 1000-litre IBC tanks, holding from -40°C to +80°C and EC...

The Pack of 50 White S60x6 PE Flat Gaskets covers a full maintenance campaign: the tanks in a fleet age together, so it makes sense to change their gaskets together, while they are empty and accessible. Fifty pieces drawn from the same supply, so identical behaviour under tightening from one tank to the next. S60x6 format, EC food...

The Pack of 100 White S60x6 PE Flat Gaskets is the trade pack: for a tank hire company or a tank reconditioner, the gasket is not a repair part but a production consumable. A single batch simplifies the traceability demanded at audit. High-density polyethylene, standard S60x6, EC food contact.

Link two IBC tanks to have a single draw-off point. The kit brings the two S60x6 adapters, the 1.20 m spiral hose, the two BDFast® compression fittings, the ball valve and its sleeve. One adapter per tank  : the set stands on its own, there is nothing else to...

The kit for the first tank of an IBC series. It brings the S60x6 adapter, the 600 mm hose, the two compression fittings, the tee, the plug and two valves. Two valves , because the lead tank serves both as an outlet and as a link : you close one without closing the...

The kit that adds a tank to an IBC series. S60x6 adapter, 600 mm hose, two compression fittings, tee, plug and one isolating valve. One valve only , where the lead kit carries two&nbsp;: a tank that has been added only needs to isolate itself. <p style="margin: 0 0...

The two kits to put two IBC tanks in series, under a single reference. The lead kit and the extension kit, that is three valves, two tees and two plugs. The two kits are not interchangeable &nbsp;: the lead tank calls for one with two valves, the next one for one with a...

Link two IBC tanks and give them a proper tap, in rigid tubes. Two S60x6 adapters, three threaded tubes already cut, tee, elbows, ball valve and hose tail. The 300 mm riser brings the outlet up to hand height &nbsp;: no more crouching down to the bung to fill a watering...

An overflow that is fitted without ever opening the tank. The Quick Joint bulkhead fitting goes on entirely from the outside &nbsp;: you drill, you push it through, you tighten the nut. Nothing to hold or screw on the inside, where nobody can reach on a 1,000-litre tank. <p...