The kit that adds a tank to an IBC series. S60x6 adapter, 600 mm hose, two compression fittings, tee, plug and one isolating valve. One valve only , where the lead kit carries two : a tank that has been added only needs to isolate itself. It goes on after the 0101596 , and leaves the way open...

Link two IBC tanks to have a single draw-off point. The kit brings the two S60x6 adapters, the 1.20 m spiral hose, the two BDFast® compression fittings, the ball valve and its sleeve. One adapter per tank  : the set stands on its own, there is nothing else to order to link two tanks together. EPDM...

Relier deux cuves IBC et leur donner un vrai robinet, en tubes rigides. Deux adaptateurs S60x6, trois tubes filetés déjà coupés, té, coudes, vanne à boisseau et porte-tuyau. La colonne de 300 mm remonte la sortie à hauteur de main  : plus besoin de s'accroupir jusqu'à la bonde pour remplir un arrosoir. Les...

The two kits to put two IBC tanks in series, under a single reference. The lead kit and the extension kit, that is three valves, two tees and two plugs. The two kits are not interchangeable  : the lead tank calls for one with two valves, the next one for one with a single valve. Already ready for a...

The kit for the first tank of an IBC series. It brings the S60x6 adapter, the 600 mm hose, the two compression fittings, the tee, the plug and two valves. Two valves , because the lead tank serves both as an outlet and as a link : you close one without closing the other. Extendable thanks to the tee. Each tank...