Male fitting 1-1/4'' - straight barbed Ø32mm

Male fitting 1-1/4'' - straight barbed Ø32mm (Reference: 100125) from CPP brand represents a high-quality technical solution for all your flexible hose connections. This glass fiber reinforced polypropylene fitting combines industrial robustness and ease of installation, meeting the requirements of professionals and informed individuals alike.

Applications and use cases

This barbed fitting finds its place in numerous technical applications. For irrigation systems, it efficiently connects flexible hoses to pressurized water networks. Industrial installations adopt it for transporting non-aggressive fluids, while agricultural applications use it for irrigation and water distribution.

Individuals appreciate it for their outdoor installations: IBC tank connections, rainwater collection systems, automatic irrigation. Building and industry professionals integrate it into their cooling circuits, transfer systems and temporary installations requiring reliable and removable connections.

Technical specifications and innovation

The design in 30% glass fiber reinforced polypropylene gives this fitting exceptional mechanical properties. This glass fiber reinforcement considerably improves the rigidity and hardness of the material, allowing it to resist mechanical stress and pressure variations.

The 1-1/4'' BSP male thread with gas pitch guarantees perfect compatibility with British standards widely adopted in Europe. The straight barbed end Ø32mm is specially designed to receive flexible hoses with corresponding inner diameter. The barbs create an optimal gripping surface for hose clamps, preventing any slipping under pressure.

The chemical resistance of polypropylene allows use with many fluids: water, non-aggressive aqueous solutions, certain solvents. Service temperature typically ranges from -10°C to +60°C depending on application.

Installation and practical use

Installation of this barbed fitting is particularly simple. On the threaded side, screw the fitting into the female element using an appropriate seal (teflon, hemp, O-ring depending on application). The tightening torque must be moderate to avoid polypropylene deformation.

For the barbed side, insert the end into the flexible hose by forcing slightly. The barbs facilitate this operation while creating a pre-seal. Then position the hose clamp on the smooth part of the hose, above the barbs, and tighten gradually to ensure final sealing.

Maintenance is limited to periodic leak checks and possible replacement of seals. Polypropylene resists UV well but storage away from direct light extends its lifespan.

Expert advice and product synergies

To optimize your installations, combine this fitting with quality stainless steel hose clamps suitable for 32mm diameter. Worm gear models offer uniform and adjustable tightening. Avoid plastic clamps for pressure applications.

In the context of IBC tanks, this fitting integrates perfectly with our S60x6 valves via an appropriate adapter. For irrigation systems, combine it with our Gardena timers and micro-perforated hoses to create efficient automatic installations.

Common mistake to avoid: never force screwing beyond natural resistance. Polypropylene can crack under excessive stress. Always use an appropriate sealing product: teflon for temporary fittings, sealing paste for permanent installations.

For seasonal applications, remember to drain circuits before frost. Although resistant, polypropylene can be damaged by frozen water expansion.

Technical characteristics