Application and use:

Perfect for use in small commercial refrigeration and air conditioning systems, in which R12, R134a, 1234yf and duracool 12a have traditionally been used.

Security:

The safe application of hydrocarbon refrigerants by accredited technical experts is guaranteed with a common sense approach and compliance with applicable safety standards and regulations.

Simply put, hydrocarbon-based refrigerant can also be used in refrigerators and air conditioning systems.

However, like gasoline, solvents and other common volatile substances, hydrocarbon refrigerant is highly flammable, so its release must be prevented when an ignition source is present. The auto-ignition temperature of the refrigerant is 460-470 ° C.

Product features:

• High purity hydrocarbon refrigerant.
• Precision propane/isobutane blend.
• Superior heat rejection – gives better heat exchange performance of the condenser.
• Only 35% by required weight of the recommended fluorocarbon refrigerant load.
• Recommended digital scales – they save a lot of time and also help avoid wasting refrigerant.
• MULTICOOL 12a is compatible with any lubricating refrigerant.

Effect on systems:

• Lower discharge pressures reduce the load on the compressor.
• Less heat at the compressor.
• Less engine draining at idle and running.
• Choice between reverse or single-use valve.
• Faster descent temperature to the vent.
• Lower the vent temperature at all times
• No upgrades to existing equipment are required.
• No changes to repair procedures during installation.
• Can thread: 1/2 ACME compatible with our DC4000 and DC402 hoses

Availability:

Available in cans of 285 ml, or 160g of product (equivalent to  430 grs  of R134a, 450grs of 1234yf, 480grs of R12).

Comes with two cans of 160 grs

ADVANTAGE of MULTICOOL 12a : MULTICOOL refrigerants do not require approvals to be purchased, or installed in an empty circuit of CFCs, HFCs or HCFCs.

Although MULTICOOL12a is miscible with R12, R134a and 1234yf, it is forbidden to mix these freons with each other

Any intervention on a circuit still containing fluorine : CFC, HFC or HCFC requires the intervener to comply with the laws in force (Decree of 4 July 2009), namely to have the freon recovered beforehand by a duly authorized professional.